What are the precautions for using the free sample cutting disc during use? December 06, 2018 3:35 AM
By : yang
Although the free sample cutting disc is very easy to use, it is very popular with users, but because it is relatively sharp, sometimes improper use will bring some bad effects to the user, so when using it, the user must pay attention to some matters. Pay great attention to the better use of free sample cutting disc. So what do users need to pay attention to when using them?
1, the front of the cutting disk operation problem: daily use, many operators are always used to operate on the cutting piece, the reason can be used in this direction, in fact, the behavior of the grinder should be specifically prohibited behavior. According to the operating procedure, when grinding the workpiece with a grinder, the operator should stand on the side of the cutting wheel of the grinding wheel and do not operate it on the front side to avoid the failure of the grinding wheel to fly out or break up and hurt people.
2, the common operation of the cutting disc: the actual daily operation, there are also such a situation, some people in order to catch up with the production task, grab the work time, the two share a grinder at the same time operation, this kind of serious violation of the rules of operation, should be strictly prohibited. When a grinder is not enough, it can be solved by adding a grinder. It is absolutely not allowed to share a grinder at the same time.
3, the cutting disk force operation problem: When the grinder is used, some operators, especially young operators, in order to achieve fast grinding speed, excessive force is too strong, this is a very unsafe operation. Any cutting disc has a certain strength, which is likely to cause the cutting disc to break, or even fly out and hurt, and a behavior should be prohibited.